Product ID:GEAR OIL AS W140 MG-2111
MSDS Date:02/25/1998
FSC:9150
NIIN:01-048-4591
Status Code:A
MSDS Number: CKRNP

Emergency Phone: 732-591-9400

Info Phone: 732-591-9400/FAX -8825

Preparer: PAUL LEWICKI

Cage: 58563

Telephone: 504-366-9105

Cage: 0PGK2

LUBE OIL BASE STOCK (DISTILLATES (PETROLEUM),

CAS: 64741-88-4

RTECS: PY8040500

PROPRIETARY ADDITIVES

Health Hazards Acute and Chronic:IF PROLONGED CONTACT WITH THIS
MATERIAL IS REQUIRED IN A CONFINED AREA AND OR THE MATERIAL HAS
BEEN HEATED, A GAS MASK OR OTHER SUITABLE BREATHING APPARATUS
SHOULD BE WORN.
Medical Cond Aggravated by Exposure:PRE-EXISTING PULMONARY AND
RESPIRATORY CONDITIONS WILL BE AGGRAVATED BY INHALATION OF THE
FUMES AND OR MIST.

First Aid:IF SWALLOWED: DO NOT INDUCE VOMITING. IF PERSON IS CONSCIOUS
REMOVE TO FRESH AIR AND GET MEDICAL HELP. NEVER ATTEMPT TO
ADMINISTER ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. IN CASE OF
SKIN CONTACT , WASH WITH DTERGENT AND HOT WATER.

Flash Point Method:COC
Flash Point:=200.C, 392.F
Extinguishing Media:CARBON DIOXIDE, WATER FOR,FOAM OR DRY CHEMICAL
Fire Fighting Procedures:WEAR MESA/NIOSH APPROVED SELF CONTAINED
BREATHING APPARATUS AND EYE PROTECTION. (SCHEDULE 13) USE WATER
SPRAY TO COOL FIRE EXPOSED CONTAINERS AND TO PROTECT PERSONNEL.
Unusual Fire/Explosion Hazard:FUMES, SMOKE, OXIDES OF SULFUR, OXIDES OF
NITROGEN AND CARBON MONOXIDE.

Spill Release Procedures:CONTAIN AND DIKE WITH INERT MATERIAL (FULLERS
EARTH, SAND, OIL ABSORBENT, ETC). PREVENT MATERIAL FROM GETTING
INTO SEWERS AND OPEN BODIES OF WATER. PUT SPILLED MATERIALS INTO
DURMS OR OTHER SUITABLE C ONTAINERS.

Handling and Storage Precautions:DO NOT HEAT ABOVE 140F. OPEN
CONTAINERS SHOULD BE STORED IN A WELL VENTILATED AREA AND ALWAYS
AWAY FROM OPEN FLAMES.
Other Precautions:CONTAMINATED CLOTHING SHOULD BE REMOVED AND LAUNDERED
BEFORE REUSE. SATURATED SHOES SHOULD BE DISCARDED.

Respiratory Protection:IF LONG TERM EXPOSURE TO VAPORS IS ANTICIPATED,
AN APPROVED AIR RESPIRATOR SHOULD BE USED, PARTICULARLY IN A
CONFINED AREA AND/OR THE MATERIAL HAS BEEN HEATED.
Protective Gloves:IMPERVIOUS
Work Hygienic Practices:NO SPECIAL HYGIENIC MEASURES ARE NECESSARY.
Supplemental Safety and Health
EMPTY CONTAINERS RETAIN RESIDUE(LIQUID OR VAPOR) AND CAN BE DANGEROUS.
DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND OR EXPOSE
SUCH CONTAINERS TO HEAT, FLAME, SPARKS OR OTHER SOURCES OF IG
NITIONS: THEY MAY EXPLODE AND CAUSE INJURY. DO NOT ATTEMPT TO
CLEAN, SINCE THE RESIDUE IS DIFFICULT TO REMOVE.

HCC:V6
Boiling Pt:=315.6C, 600.F
Vapor Pres:1 MM/ 68 DEG
Vapor Density:<1 (AIR=1)
Spec Gravity:.8990(H20=1)
Solubility in Water:0
Appearance and Odor:AMBER COLOR-PROPANE ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS AND ALKALIES
Stability Condition to Avoid:DO NOT HEAT ABOVE 140F. AVOID OPEN FLAME,
PARTICULARLY IN CONFINED OR NON-VENTILATED AREAS.
Hazardous Decomposition Products:HYDROGEN SULFIDE

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS CONCERNING HAZARDOUS WASTE DISPOSAL.

Toxicological Information:BASED UPON AVAILABLE DATA AND TECHNOLOGY, THE
LUBRICANT DESCRIBED HEREIN IS NOT CONSIDERED TO BE TOXIC OR
CARCINOGENIC TO HUMANS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.